Ultimate Precision Opto Compressor
If you like this plug-in you might be interested in the Pro Series Bundle, containing all three in the collection.
P&M OptoMax is a state of the art plug-in for use in your favorite digital audio workstation. P&M OptoMax is designed to give you precision dynamic control over any type of media whether its vocals, drums or entire compositions.
The plug-ins intuitive user interface allows for effortless control over compression levels, and frequency side-chaining, as well as other crucial sonic analysis tools.
Controls:
Threshold: Sets the input level at which compression will begin.
Input Level: Adjusts the level of the input signal.
GR Meter: Shows the amount of gain reduction being applied to the input signal.
Makeup Gain: Sets the amount of gain applied to the signal after compression.
Attack: Sets how long the compressor takes to kick in once the input signal exceeds the threshold.
Ratio: Fixed values for accurate instrument and bus compression.
Release: Sets how long it takes for the compression to stop once the signal has dropped below the threshold.
Surround: Complex stereo widening effect, expands the sonic depth and presence of the output audio.
Dry Input: Adds the unprocessed, direct signal to the mix for serial or parallel processing. Turn Dry Mix On/Off by clicking the button below the knob.
Tube: Restores warmth and detail lost during digital compression.
Lookahead: Turns on Compressor’s Lookahead feature enabling it to duck the sound earlier than a triggering peak appears.
Surround: Increases stereo imaging and depth of field.
Clipper: For limiting your signal’s overall output.
Peak: Displays the Peak decibel or RMS level.
System requirements & Compatibility
NO iLok OR eLicenser DONGLE REQUIRED !
Apple System Requirements :
Intel Macs running Mac OS 10.7 or above (10.9 or above recommended under official support remit)
AudioUnit, AAX (Pro Tools) and VST plug-ins.
32-bit and 64-bit are supported.
You may authorize up to 5 computers with a simple one-click authorization procedure.
Old PPC Macs are not supported.
Windows Minimum Requirements :
Pentium® iV 2GHz / Athlon™XP 2GHz with 1Gb of RAM.
Windows 7 and up - XP - Vista (32-bit and 64-bit).
VST, AU and AAX (Pro Tools) plug-ins.
32-bit and 64-bit are supported.
You may authorize up to 5 computers with a simple one-click authorization procedure.
Demo Versions
NO iLok OR eLicenser DONGLE REQUIRED !
The Plug & Mix Plug-ins DEMO download links are available from our "Download Page".
Download the full Pro Series collection. Once downloaded, launch the installer and select the plug-in(s) you wish to install. Once installed, the plug-in(s) will start working in DEMO mode. You only need to authorize them as described in the authorization paragraph bellow to use them with no limitation.
Demo limitations are :
White noise fades in/out every 45 secondes
After 30 minutes you may relaunch the plug-in for your demo to become active again.
Download P&M Pro Series Plug-ins.
Tech Support
Please visit our P&M Plug-ins TECH SUPPORT and FAQ pages before contacting us.
Our official P&M Plug-ins FORUM BOARD is also available for further information.
If you still need to contact us, go to the CONTACT page.
DISCLAIMER
All product names used above are trademarks of their respective owners which are in no way associated or affiliated with Plug & Mix. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Plug & Mix’s sound model development.
|