Search
 
Advanced Search
Manufacturers
Categories
Private Deal Zone
Get prices that can not be advertised from our product pages!
Specials more
MDynamicsMB
MDynamicsMB
$162.00
$80.00
Share and Follow Us
Bookmark and Share
News RSS feed Freeware RSS feed
Freeware RSS feed Freeware RSS feed
Twitter
What's New? more
Moogerfooger MF-109S Saturator
Moogerfooger MF-109S Saturator
$59.00
$59.00
Oxford SuprEsser Native
[NATSUP]
$259.00 $244.00
Mac PCAAXAURTASVST
Click for member's Price!

Professional De-Esser and a Dynamic EQ

The Oxford SuprEsser is both a very highly-featured professional De-Esser and a Dynamic EQ. There is a simple mode for quick fixes, but also an advanced mode for increased functionality and fine-tuning. The combination of an intuitive FFT display and three listen modes enables the user to easily see and hear exactly where the problem frequencies are, allowing the rapid reduction or removal of the offending audio.

As well as being able to trigger the full band compression, only the offending frequencies can be carefully carved out. Since the SuprEsser can operate at all frequencies, plosives and other annoyances can also be removed effortlessly, making it more than a simple De-Esser. Additional features include Automatic Level Tracking, Linear Phase Filtering and a Wet/Dry blend control for final balancing. More...

Features

  • Highly featured professional De-Esser
  • Linear Phase Dynamic EQ
  • Transparently controls aggressive frequencies
  • Automatic Level Tracking follows energy levels (no need to automate threshold)
  • Large intuitive graphic display makes finding frequencies very easy
  • Full Spectrum Operation (20Hz -20KHz)
  • Three different 'Listen' modes
  • Very easy to use
  • Advanced Mode for ultimate control of the Dynamic EQ
  • Many creative as well as corrective uses
  • Presets giving good starting points
  • Platforms Supported : Pro Tools LE (RTAS), M-Powered (RTAS), AU, VST
  • Product Info

    A new concept is born a simple and intuitive De-Esser, PLUS access to a much more sophisticated frequency specific compressor, giving complete control over aggressive frequencies wherever they may be in the audio spectrum. With the Oxford SuprEsser you can take out unwanted frequency peaks as and when they occur - unlike applying a fixed EQ to the whole channel.

    As a De-Esser, the Oxford SuprEsser is designed for the treatment of sibilance and fricatives in vocals, and the treatment of unwanted whistles and 'spirant' artefacts associated with wind instruments. However, it can equally be applied to removing low-end 'plosives' and thuds from over-close vocal work, without affecting components nearby in the frequency spectrum, keeping the low-end in tact. For the most natural sounding results, the SuprEsser de-esses only the frequency band you set - so you won't end up with an over-de-essed lisp-like voice with all the top end gone!

    Detailed visual feedback is provided thanks to the highly intuitive graphical display, allowing quick identification of the frequencies that need treatment and where to set the threshold. The threshold level and peak hold levels of the user-definable band are shown on the graph, alongside the FFT display of the narrow band signal, which includes retention of the peak level and the frequency containing the most energy.

    At the heart of the Oxford SuprEsser is an enhanced version of the compressor section of the Oxford Dynamics plug-in, which is renowned amongst professional users for delivering precise and transparent control of peaks. Around this is built a pair of cross-over filters to make the compressor react only to the defined frequency band. These linear phase filters are modelled on the filters from the Oxford EQ, making the SuprEsser useful for precise mastering work as well as mixing work.

    Three listen modes allow the user to listen to the mix, the output of the band-pass filter ('Inside') or the output of the band-reject filter ('Outside').

    Careful thought has been put into making the Oxford SuprEsser extremely easy and quick to use. The screen shot above shows the plug-in as it appears when first activated. Once the frequency band has been defined, simply lower the threshold fader until the gain reduction meter starts to kick in. The plug-in then automatically tracks the general signal level and the threshold follows accordingly so that it gives the same relative amount of gain reduction as the signal level rises or falls. This is perfect for vocals where, for example, a vocalist is louder in the chorus than the verse, but you want to apply the same relative amount of de-essing, and not over de-ess in the chorus. This Auto Level Tracking mode lets the SuprEsser do all the hard work. It can also be switched off for a fixed threshold.

    In its default mode of operation, the Oxford SuprEsser feeds the defined 'Band' signal to the compressor to affect only this narrow band signal. The result is that the compressor reacts only to specific frequency components when they reach a specific threshold, and applies compression only to these specific frequency components, leaving the rest of the spectrum untouched. 'Wide' can also be selected to allow full-band compression reacting to only specfic frequencies or any combination of Band and Wide defining 'when the compressor reacts' and 'what it compresses' (narrow or wide/full-band).

    The Oxford SuprEsser comes complete with many presets to act as good starting points, alternatively the advanced section gives full access to all controls for precise correction, or even creative use.

    System Requirements

    * An ilok dongle is required to authorize any Sonnox products. ilok dongles can be purchased from your local dealer or from www.ilok.com
    Pro Tools
  • Pro Tools 6.0 or above
  • Approved Pro Tools CPU, OS and hardware configuration. More details: www.digidesign.com
  • Mac OSX 10.3 or later (Leopard supported see Digidesign for details)
  • Windows XP / Vista32
  • RAM 1GB minimum
  • iLok key with latest drivers
  • Audio Units
  • Audio Units compatible application (Logic, Digital Performer etc.)
  • Mac OSX 10.4 or later (including Leopard)
  • RAM 1GB minimum
  • iLok key with latest drivers
  • VST
  • VST compatible application (Cubase, Nuendo, Acid etc.)
  • Mac OSX 10.4 or later (including Leopard)
  • Windows XP / Vista32
  • RAM 1GB minimum
  • iLok key with latest drivers


  • Download the Oxford SuprEsser pdf manual

    Videos

        

    Write Review Reviews
    Customers who bought this product also purchased
    Oxford Drum Gate
    Oxford Drum Gate
    VoxDoubler
    VoxDoubler
    MultiDynamics 6
    MultiDynamics 6
    FutzBox Native
    FutzBox Native
    SA-2 Dialog Processor Native
    SA-2 Dialog Processor Native
    Oxford Dynamics HD HDX and Native
    Oxford Dynamics HD HDX and Native
    Oxford Limiter v2 HD HDX and Native
    Oxford Limiter v2 HD HDX and Native
    Oxford EQ HD-HDX and Native
    Oxford EQ HD-HDX and Native
    Sonnox Envolution Native
    Sonnox Envolution Native
    Shopping Cart more
    0 items
    Currency : USD

    Prices exclude local taxes. Taxes only apply to Canadian residents.
    Newsletter
    Don't miss out on our hot promotions, group-buys, product launch-outs, etc.
    Manufacturer Info
    Sonnox Oxford Homepage
    Other products
    Notifications more
    NotificationsNotify me of updates to Oxford SuprEsser Native
    Tell A Friend
     
    Tell someone you know about this product.
    Information
    FAQs
    Shipping & Taxes
    Privacy Notice
    Conditions of Use
    Link To Us
    Contact Us
    Secure Store
    secure online store
    Company Info
    DontCrac[k] :
    9198-8857 Quebec Inc.
    Montreal
    Quebec - Canada
    Tuesday 19 March, 2024 115068124 requests since Thursday 01 September, 2005
    © 2005-2024 DontCrac[k]